
Smart home planning for electrical contractors
I plan the smart home.
You install it.
For your smart home project I take on the consulting, planning, programming and support.
- Finished plans and a parts list with prices before you submit your quote
- Programming and parameterization complete from a single source
- If the programming does not work, that is on me, not on you
30 minutes. An assessment of whether I can help.
Division of roles
What stays with you. What I take on.
This stays with you
- Your customer and the order
- The site and the complete installation
- The invoice to the client
- The customer relationship, beyond the project too
This is what I take on
- System planning with floor plan, circuit diagram and distribution board plan
- Parts list with prices as the basis for your quote
- Programming and parameterization, complete
- Questions from the site, and on request the technical talks with the client
- Complete system documentation
I do not take customers away from you.
I do not install. There is no crew of fitters at my firm and no quote to your client. My company Sopal GmbH only steps in as general contractor when a project has no electrician on board. Once an electrician is set, that is how it stays.
The plans bear my signature. The system bears your name.
Services
Building automation
Consulting, planning, programming and support for Loxone. Together we clarify what your customer wants. I translate that into a plan your team can execute right away. In detail, I take on:
- Consulting in the design phase, while decisions can still be changed at no extra cost
- System planning with floor plan, circuit diagram and distribution board plan
- Programming and parameterization of the system
- Component selection
- Scenes and automation logic
- Network and Wi-Fi planning
- Support after handover, remotely or on site
Scope From single-family homes and apartment buildings to office buildings and small commercial properties, for private and commercial clients.
Process
How a joint project works
Your business remains the partner on site. Your team builds the system, and in the background I take care of consulting, system planning, programming and support. That is the work between the trades that nobody else takes on. I only take on the tasks you want to hand over. You decide the split, fresh for every project. You keep your customer and gain the specialist planning on top.
Free initial consultation about your project
In thirty minutes you describe the project or the inquiry on your desk. I tell you whether I can help and what a sensible approach looks like. If it is not a fit, I will say so.
Outcome
- Assessment of whether I can help
- Overview of the next steps
Consulting and rough concept at a flat rate
After the initial consultation I quote you a flat rate for the consulting and the design planning. Together with your customer we clarify which functions the house should have. The concept stays in the project, whether or not we continue it together.
Outcome
- Detailed explanation of possible functions
- List of functions for every room out to the exterior
- Every function prioritized, so your customer can later cut what turns out too expensive
Design planning with floor plan
I translate the rough concept into a floor plan, which we refine together until it fits. Based on the floor plan, you receive a flat-rate quote for planning and programming.
Outcome
- Agreed floor plan with all smart home functions
- Flat-rate quote for planning and programming
Detailed planning of the overall system
With the floor plan complete, work on the circuit diagram and the distribution board plan can begin. Added to that is a parts list of all installed components with prices. Only on this basis do you submit a reliable quote to the client, and tenders rely on it too.
Outcome
- Circuit diagram
- Distribution board plan
- Parts list of all components with prices
Your team builds, I stay available
Your team installs according to plan and your business remains the contact on site. If a question comes up, I answer it directly. I keep track of changes so the documentation is correct in the end.
Outcome
- Installation according to plan
- Questions answered, changes recorded
I program and test
I handle the programming. Scenes are set up and the automation is tested before anyone moves in. The initial inspection and the commissioning of the installation stay with your business. After that I show the residents how to operate their home.
Outcome
- Configured and tested system
- Introduction for the residents
Handover with complete documentation
All plans are complete and every change is documented. Your business and your customer receive the complete system documentation. Whoever retrofits the pool control in three years, for example, will find everything in place.
Outcome
- Complete documentation of all plans and changes
Who looks after the system once the project is handed over?
The support usually comes from me, with a maintenance contract if you wish, otherwise on demand. If your business wants to keep the handover briefing and the later support, we agree that individually. I add new functions or adjust routines remotely, provided the system has an internet connection. Questions about the smart home have a fixed address even years after move-in.
For your business
What your business gets out of it
A quote you can calculate
You receive the circuit diagram and distribution board plan plus a parts list with prices before you quote. My planning costs a flat rate per planning phase, which you know in advance. No loose ends in your calculation.
I carry the software risk
If the programming does not work, that is on me, not on you. Your business warrants the installation, just as in any other project.
Buy in expertise instead of advertising a position
According to the ZVEH, the German electrical trades had more than 65,000 unfilled positions at the start of 2026, including over 5,000 master electrician posts. You will not hire a planner and programmer that quickly. Buying one in, project by project, starts with your next order.
A calm project
On request I handle the technical talks with the client, so the evening calls do not land on you. For every question about the system, I am the fixed address in the project. At handover your business and your customer receive the complete system documentation.
On commissioning Both are possible: you commission me and bill the planning on to your customer, or your customer commissions me directly and you carry out the installation. We settle what suits your project and how it is billed in the initial consultation.
All of this has to work together
A house isn’t smart because it has an app. It’s smart when nobody has to operate anything anymore. The lights are on before anyone reaches for a switch. The shading closes before the room heats up. The wallbox charges when the sun is shining. For that to happen, all these trades have to talk to each other.
Truly smart is what you don’t notice.
Your business already builds every one of these trades. The house only becomes smart once the interfaces between them work together. Those are what I plan and program, so that your trades add up to one system.
My own home is the model house
Not a showroom, but a single-family home lived in every day. Everything integrated here has been working together in real everyday life for years, not just in theory. During our conversation I will share my screen, walk you through the app and show you the functions live in operation.
About me
I live in the system I plan.
Christian Uhrmacher, electrical engineer specializing in automation technology. I started out in the trades with an apprenticeship as a mechatronics technician, followed by further training as a state-certified technician. I have worked on construction sites as an electrical installer myself. I know the side you are on.
After that I spent several years developing software and working as a project manager and managing director, before starting my own engineering firm. Through my company Sopal GmbH I also act as a general contractor for electrical installations, with the work carried out by specialist firms.

Frequently asked questions
The questions before a first joint project
What does the planning cost?
Billing is a flat rate per planning phase. Before you submit your quote, you know my price and factor it in like a material item. The initial consultation is free. I will name the figure for your specific project there.
Will I lose my customer to you?
No. I do not install and I do not quote your client for the execution. Toward your customer I appear as your specialist planner if you want me to, otherwise I stay invisible in the background. My company Sopal GmbH only steps in as general contractor when a project has no electrician on board. Once an electrician is set, that is how it stays.
Will you interfere with the installation?
No. How the installation is done is up to you and your team. I deliver the plans, answer questions from the site and record changes for the documentation. Your business runs the site.
What if the project is small?
Then I will tell you so openly in the initial consultation. Some inquiries need no external planning, and some turn into rework without it. You get that assessment free of charge in thirty minutes. If it is not a fit, I will say so.
Why Loxone and not KNX?
Because you can only truly master one system. Whoever offers every system knows each of them only halfway. I have specialized in Loxone and know it down to the last function block. I connect KNX, Modbus, DALI, EnOcean and BACnet as interfaces wherever a project needs them. Whether Loxone suits your project is something we clarify in the initial consultation, on the concrete case.
Do I become dependent on you?
No. Every project stands on its own, and you commission me case by case. Every project comes with complete system documentation that stays with you and your customer. Anyone can build on it, even without me.
Who is liable if something does not work?
If the programming does not work, that is on me, not on you. Your responsibility remains the installation, just as you know it from any other project.
Who commissions you?
Both are possible, depending on the project. Either you commission me and bill the planning on to your customer, or your customer commissions me directly and you carry out the installation. We settle what makes sense for your project and how it is billed in the initial consultation.
Want to offer
smart home projects
without building a planning department?
Then let’s talk about your next order, no strings attached. You bring the project or the open inquiry, and together we will see whether and how I can support your business.
Free initial consultation30 minutes. An assessment of whether I can help.